18 August, 2022

Congratulations on Hussein's paper published in Scientific Reports

Minimizing the wiring in distributed strain sensing using a capacitive sensor sheet with variable-resistance electrodes Hussein Nesser, Gilles Lubineau Scientific Reports 12(1):13950

Read more

30 July, 2022

Prof Lubineau and Hassan presented in 10th European Workshop on Structural Health Monitoring in Palermo

10th European Workshop on Structural Health Monitoring (EWSHM22) Palermo, Italy July 4 - 7, 2022

Read more

30 July, 2022

Our team members attended 20th European Conference in Composite Materials (ECCM) in Lausanne

20th European Conference on Composite Materials (ECCM20) Lausanne, Switzerland June 26-30, 2022

Read more

22 July, 2022

Congratulations on Ruslan's paper published in Materials & Design

Metallization of polymers and composites: State-of-the-art approaches

Ruslan Melentiev, Arief Yudhanto, Ran Tao, Todor Vuchkov, Gilles Lubineau

Materials & Design, Elsevier BV, 2022-07-22

Read more

07 July, 2022

Congratulations on Xiaole's paper published in International Journal of Solids and Structures

Learning from Global Sensitivity Analysis about identification of adhesion properties between an elastoplastic film and a rigid substrate

Xiaole Li, Gilles Lubineau

International Journal of Solids and Structures, Accepted July 2022

Read more

30 June, 2022

Ruslan Melentiev presented his works in 6th CIRP Conference in Lyon

CIRP'S 6TH INTERNATIONAL CONFERENCE ON SURFACE INTEGRITY in Lyon, France. Ruslan presented his proceedings paper title "Effect of actual surface area on adhesion strength of copper electroplated on ABS plastic micro-textured by hot embossing"

Read more

28 June, 2022

Congratulations on Jassem's paper published in Composite Structures

Laser ablation of CFRP surfaces for improving the strength of bonded scarf composite joints

Jassem ALYousef, Arief Yudhanto, Ran Tao, Gilles Lubineau Composite Structures, Accepted June 2022

Read more

17 June, 2022

Congratulations on Reem's paper published in Polymer

Polyethylene grafted silica nanoparticles via surface-initiated polyhomologation: A novel filler for polyolefin nanocomposite Reem D. Alghamdi; Arief Yudhanto; Gilles Lubineau; Edy Abou-Hamad; Nikos Hadjichristidis

Read more

30 May, 2022

Congratulations on Ruslan's paper published in CIRP Journal of Manufacturing Science and Technology

Large-scale hot embossing of 1 µm high-aspect-ratio textures on ABS polymer

Ruslan Melentiev, Gilles Lubineau

CIRP Journal of Manufacturing Science and Technology, May 2022

Read more

26 May, 2022

Congratulations on Xiaole's paper published in International Journal of Solids and Structures

Cassette-like peeling system for testing the adhesion of soft-to-rigid assemblies

Xiaole Li, Ran Tao, Yangyang Xin, Gilles Lubineau

International Journal of Solids and Structures, Accepted May 2022

Read more

27 April, 2022

Congratulations on Yangyang's paper published in Applied Materials Today

Evolution of the Seebeck effect in nanoparticle-percolated networks under applied strain Yangyang Xin, Hussein Nesser, Jian Zhou, Gilles Lubineau Applied Materials Today: April 2022

Read more

02 April, 2022

Congratulations on Mjed's paper published in Composite Structures

Laser-based pretreatment of composite T-joints for improved pull-off strength and toughness M Hashem, A Wagih, Gilles Lubineau Composite Structures, April 2022

Read more

02 April, 2022

Congratulations on Ran's paper published in Composites Part A: Applied Science and Manufacturing

Toughening adhesive joints through crack path engineering using integrated polyamide wires Ran Tao, Xiaole Li, Arief Yudhanto, Marco Alfano, Gilles Lubineau Composites Part A: Applied Science and Manufacturing 158, 106954

Read more

09 March, 2022

SASCOM Seminar | 3D printed composites: Current development and future trend |Prof. Akira Todoroki

Wednesday, March 9, 2022 10:30 - 11:15 a.m. (AST) on zoom by Prof. Akira Todoroki

Read more

28 February, 2022

Professor Lubineau's talk at RobotoKAUST | Super-sensitivity in resistive and capacitive strain sensing

Gilles Lubineau| RobotoKAUST | Super-sensitivity in resistive and capacitive strain sensing | 28 Feb 2022 |Building 19, Level 3; virtual participation: Zoom

Read more

16 February, 2022

Technical Forum | Composite Material: Opportunities and Challenges

Date: Wednesday - February 16, 2022 Time: 1:00 PM - 3:50 PM (KSA Time GMT+3)

Read more

09 February, 2022

SASCOM Seminar | Carbon Nanostructures of Oil Fly Ash as Reinforcements for Different Polymers |Prof. Numan Salah

Wednesday, February 9, 2022 5:30 - 6:15 p.m. (AST) on zoom by Prof. Numan Salah

Read more

31 January, 2022

Congratulations on Michele's new paper published in ACS Energy Letters

Congratulations on Michele's new paper published in ACS Energy Letters: Mechanical Reliability of Fullerene/Tin Oxide Interfaces in Monolithic Perovskite/Silicon Tandem Cells

Read more