News
07 May, 2023
KAUST Research Conference: Energizing the Future with CompositesMCEM Lab host KAUST Research Conference: Energizing the Future of Composites on June 12 - 14, 2023. Registration deadline: May 31st.
06 April, 2023
SASCOM Seminar Series | Assessment of hybrid thin-thick- plies under different loading conditions: An experimental approach | Prof. Tamer SebaeyTuesday, May 2nd, 2023 17:00 - 18:00 KSA time (UTC +3) On ZOOM
29 March, 2023
Congratulations on Bram's paper published in Computational MechanicsFrankenstein's data-driven computing approach to model-free mechanics
Bram van der Heijden, Yunteng Wang and Gilles Lubineau
Computational Mechanics (2023)
14 February, 2023
SASCOM Seminar Series | Imaging magic in digital image correlation: new imaging leads to better measurements | Dr. Bin ChenMonday, February 27th, 2023 13:00 - 14:00 KSA time (UTC +3) On ZOOM
10 January, 2023
Congratulations on Ping's paper published in Composites Science and TechnologyPrediction of a complex delamination front using a general cohesive model
Ping Hu, Xiaole Li, Gilles Lubineau
Composites Science and Technology , Volume 233, March 2023, 1109911
01 December, 2022
Congratulations Ping successfully defending his thesis and receiving his PhD degreeCongratulations to Ping Hu for successfully defending his thesis and receiving his PhD degree.
29 November, 2022
SASCOM Seminar Series | Hybrid and Bio-Inspired Polymeric Composite Structures | Prof. Mohamed A. EltaherThursday, December 15th , 2022 5:00 - 6:00 p.m. (AST) On ZOOM by Prof. Mohamed A. Eltaher
13 October, 2022
SASCOM MasterClass | Composite materials for the structural strengthening of concrete structures|Session 3Session 3: Design guidelines October 25th, 2022 3-6 pm KSA (UTC+3) On ZOOM (Registration end date: September 25th 2022)
11 October, 2022
SASCOM MasterClass | Composite materials for the structural strengthening of concrete structures|Session 4Session 4: Design guidelines (cont’d) and case study November 1st, 2022 3-6 pm KSA (UTC+3) On ZOOM (Registration end date: September 25th 2022)
28 September, 2022
SASCOM MasterClass | Composite materials for the structural strengthening of concrete structures|Session 2Session 2: Evidence of strengthening effectiveness (cont’d) October 11th, 2022 3-6 pm KSA (UTC+3) On ZOOM (Registration end date: September 25th 2022)
13 September, 2022
SASCOM MasterClass | Composite materials for the structural strengthening of concrete structures|Session 1Session 1: Properties of composite materials, strengthening techniques, and evidence of strengthening effectiveness September 28th, 2022 3-6 pm KSA (UTC+3) On ZOOM The registration end date is by September 25th.
28 August, 2022
Congratulations on Hussein's paper published in Scientific reportsMinimizing the wiring in distributed strain sensing using a capacitive sensor sheet with variable-resistance electrodes Hussein Nesser, Gilles Lubineau Scientific reports 12, Article number: 13950 (2022)
25 August, 2022
SABIC-KAUST collaboration: Accomplishing KAUST-SABIC project on Etchless Plating SolutionAccomplishing KAUST-SABIC project on Etchless Plating Solution
Matthieu Mulle, Saad Nauman, Arief Yudhanto, Xiaole Li, Ran Tao, Ruslan Melentiev, Lujain Fatta, Gilles Lubineau
24 August, 2022
Congratulations on Ahmed's paper published in Composites Part A: Applied Science and ManufacturingSimultaneous strengthening and toughening of composite T-joints by microstructuring the adhesive bondline Ahmed Wagih, M. Hashem, Gilles Lubineau Composites Part A: Applied Science and Manufacturing : Volume 162, November 2022, 107134
21 August, 2022
Congratulations on Ping's paper published in Composites Science and TechnologyDecomposing the coupling damage in mode I multidirectional delamination
Ping Hu, Ran Tao, Xiaole Li, Gilles Lubineau
Composites Science and Technology , Volume 229, October 2022, 109684
30 July, 2022
Prof Lubineau and Hassan presented in 10th European Workshop on Structural Health Monitoring in Palermo10th European Workshop on Structural Health Monitoring (EWSHM22) Palermo, Italy July 4 - 7, 2022
30 July, 2022
Our team members attended 20th European Conference in Composite Materials (ECCM) in Lausanne20th European Conference on Composite Materials (ECCM20) Lausanne, Switzerland June 26-30, 2022
22 July, 2022
Congratulations on Ruslan's paper published in Materials & DesignMetallization of polymers and composites: State-of-the-art approaches
Ruslan Melentiev, Arief Yudhanto, Ran Tao, Todor Vuchkov, Gilles Lubineau
Materials & Design, Elsevier BV, 2022-07-22
07 July, 2022
Congratulations on Xiaole's paper published in International Journal of Solids and StructuresLearning from Global Sensitivity Analysis about identification of adhesion properties between an elastoplastic film and a rigid substrate
Xiaole Li, Gilles Lubineau
International Journal of Solids and Structures, Accepted July 2022
30 June, 2022
Ruslan Melentiev presented his works in 6th CIRP Conference in LyonCIRP'S 6TH INTERNATIONAL CONFERENCE ON SURFACE INTEGRITY in Lyon, France. Ruslan presented his proceedings paper title "Effect of actual surface area on adhesion strength of copper electroplated on ABS plastic micro-textured by hot embossing"