10th European Workshop on Structural Health Monitoring (EWSHM22) Palermo, Italy July 4 - 7, 2022

20th European Conference on Composite Materials (ECCM20) Lausanne, Switzerland June 26-30, 2022

Metallization of polymers and composites: State-of-the-art approaches

Ruslan Melentiev, Arief Yudhanto, Ran Tao, Todor Vuchkov, Gilles Lubineau

Materials & Design, Elsevier BV, 2022-07-22

Learning from Global Sensitivity Analysis about identification of adhesion properties between an elastoplastic film and a rigid substrate

Xiaole Li, Gilles Lubineau

International Journal of Solids and Structures, Accepted July 2022

CIRP'S 6TH INTERNATIONAL CONFERENCE ON SURFACE INTEGRITY in Lyon, France. Ruslan presented his proceedings paper title "Effect of actual surface area on adhesion strength of copper electroplated on ABS plastic micro-textured by hot embossing"

Laser ablation of CFRP surfaces for improving the strength of bonded scarf composite joints

Jassem ALYousef, Arief Yudhanto, Ran Tao, Gilles Lubineau Composite Structures, Accepted June 2022

Polyethylene grafted silica nanoparticles via surface-initiated polyhomologation: A novel filler for polyolefin nanocomposite Reem D. Alghamdi; Arief Yudhanto; Gilles Lubineau; Edy Abou-Hamad; Nikos Hadjichristidis

Large-scale hot embossing of 1 µm high-aspect-ratio textures on ABS polymer

Ruslan Melentiev, Gilles Lubineau

CIRP Journal of Manufacturing Science and Technology, May 2022

Cassette-like peeling system for testing the adhesion of soft-to-rigid assemblies

Xiaole Li, Ran Tao, Yangyang Xin, Gilles Lubineau

International Journal of Solids and Structures, Accepted May 2022

Wednesday, June 8, 2022 5:30 pm - 6:15 pm KSA Time (UTC +3) on zoom by Eng. Parvez Md Anwar



Evolution of the Seebeck effect in nanoparticle-percolated networks under applied strain Yangyang Xin, Hussein Nesser, Jian Zhou, Gilles Lubineau Applied Materials Today: April 2022

Laser-based pretreatment of composite T-joints for improved pull-off strength and toughness M Hashem, A Wagih, Gilles Lubineau Composite Structures, April 2022

Toughening adhesive joints through crack path engineering using integrated polyamide wires Ran Tao, Xiaole Li, Arief Yudhanto, Marco Alfano, Gilles Lubineau Composites Part A: Applied Science and Manufacturing 158, 106954

Wednesday, March 9, 2022 10:30 - 11:15 a.m. (AST) on zoom by Prof. Akira Todoroki

Gilles Lubineau| RobotoKAUST | Super-sensitivity in resistive and capacitive strain sensing | 28 Feb 2022 |Building 19, Level 3; virtual participation: Zoom

Date: Wednesday - February 16, 2022 Time: 1:00 PM - 3:50 PM (KSA Time GMT+3)

Wednesday, February 9, 2022 5:30 - 6:15 p.m. (AST) on zoom by Prof. Numan Salah

5 - 7 p.m. KSA time (UTC+3), Tuesday, 1 February 2022

Congratulations on Michele's new paper published in ACS Energy Letters: Mechanical Reliability of Fullerene/Tin Oxide Interfaces in Monolithic Perovskite/Silicon Tandem Cells

On the impact damage resistance and tolerance improvement of hybrid CFRP/Kevlar sandwich composites

Muhammad Basha, A Wagih, A Melaibari, Gilles Lubineau, MA Eltaher

Microporous and Mesoporous Materials, 333, 111732