Congratulations on Yongwei's new paper published on Computer Methods in Applied Mechanics and Engineering: Strength-induced peridynamic modeling and simulation of fracturesin brittle materials

Congratulations onRan's new paper accepted by Materials: Effect of mechanical pre-treatments on damage mechanisms and fracture

Congratulations on Liping's new paper accepted by IEEE SENSORS JOURNAL: Smartphone-based single-camera stereo-DIC system: thermal error analysis and design recommendations

Congratulations on Fei Han's new paper accepted by Computational Mechanics: A dynamic hybrid local/nonlocal continuum model for wave propagation

Congratulations on Saad's new chapter, Nanocomposite sensors for smart textile composites, on the book Nanosensors and Nanodevices for Smart Multifunctional Textiles

Congratulations on Ran's new paper in Composite Part A: Laser-based interfacial patterning enables toughening of CFRP/epoxy joints through bridging of adhesive ligaments

Congratulations of Ping's new paper accepted by Composites Science and Technology: An enriched cohesive law using plane-part of interfacial strains to model intra/inter laminar coupling in laminated composites

Congratulations on Liping's new paper published in Measurement：A smartphone camera and built-in gyroscope based application for non-contact yet accurate off-axis structural displacement measurements

Congratulations for Arief's new paper in Composites Science and Technology: Enhancement of fracture toughness in secondary bonded CFRP using hybrid thermoplastic/thermoset bondline architecture

Congratulations on Ahmed's new paper published in the Composite Structures：Post-impact flexural behavior of carbon-aramid/epoxy hybrid composites

Congratulations for Ditho's new paper in Composite Structures: Characterizing and modeling the progressive damage of off-axis thermoplastic plies: effect of ply confinement

Ahmed's new paper accepted in Composites Part A: Applied Science and Manufacturing: Improving mode II fracture toughness of secondary bonded joints using laser patterning of adherends

Ping Hu, Ditho Pulungan; Ran Tao, Gilles Lubineau; An experimental study on the influence of intralaminar damage on interlaminar delamination properties of laminated composites;

Yongwei Wang, Fei Han, Gilles Lubineau; A Hybrid Local/Nonlocal Continuum Mechanics Modeling and Simulation of Fracture in Brittle Materials

Xiaole Li, Ran Tao, Arief Yudhanto, Gilles Lubineau; How the spatial correlation in adhesion properties inuences the performance of secondary bonding of laminated composites; International Journal of Solids and Structures; Accepted in April 2020

Ragesh's new paper accepted in Soft Robotics: Low-Voltage-Driven Large-Amplitude Soft Actuators Based on Phase Transition.

COHMAS to host KAUST Research Conference: Shaping the future of Composite Materials on March 16-18, 2020​.

Prof. Gilles Lubineau has been elected as a member of the European Academy of Sciences and Arts.

Ran's new paper accepted in Composites Science and Technology: On controlling interfacial heterogeneity to trigger bridging in secondary bonded composite joints: An efficient strategy to introduce crack-arrest features.

Congratulations to Ditho Ardiansyah Pulungan for successfully defending his thesis and receiving his PhD degree.