WCARP Related Publications

31 August, 2026

  1. Enhancement of fracture toughness in secondary bonded CFRP using hybrid thermoplastic thermoset bondline architecture
  2. Bio-inspired adhesive joint with improved interlaminar fracture toughness
  3. Making a Bilateral Compression/Tension Sensor by Pre-Stretching Open-Crack Networks in Carbon Nanotube Papers
  4. Ultrasensitive, Stretchable Strain Sensors Based on Fragmented Carbon Nanotube Papers
  5. Laser-based interfacial patterns enable toughening of CFRPepoxy joints through bridging of adhesive ligaments
  6. Enhanced mode II fracture toughness of secondary bonded joints using tailored sacrificial cracks inside the adhesive
  7. Surface preparation strategies in secondary bonded thermoset-based composite materials A review
  8. Effect of Mechanical Pretreatments on Damage Mechanisms and Fracture Toughness in CFRPEpoxy Joints. Materials
  9. Influence of curing processes on the development of fiber bridging during delamination in composite laminates
  10. Strain Sensing by Electrical Capacitive Variation From Stretchable Materials to Electronic Interfaces
  11. Improving mode II fracture toughness of secondary bonded joints using laser patterning of adherends
  12. Evolution of the Seebeck effect in nanoparticle-percolated networks under applied strain
  13. Laser-engraved carbon nanotube paper for instilling high sensitivity, high stretchability, and high linearity in strain sensors
  14. In situ analysis of interfacial damage in adhesively bonded composite joints subjected to various surface pretreatments
  15. Minimizing the wiring in distributed strain sensing using a capacitive sensor sheet with variable-resistance electrodes
  16. On controlling interfacial heterogeneity to trigger bridging in secondary bonded composites an efficient strategy to introduce crack-arrest features
  17. Laser-based surface patterning of composite plates for improved secondary adhesive bonding
  18. How variability in interfacial properties results in tougher bonded composite joints by triggering bridging
  19. A highly stretchable strain-insensitive temperature sensor exploits the Seebeck effect in nanoparticle-based printed circuits
  20. An experimental study on the influence of intralaminar damage on interlaminar delamination properties of laminated composites
  21. High‐Sensitivity RFID Sensor for Structural Health Monitoring
  22. How the spatial correlation in adhesion properties influences the performance of secondary bonding of laminated composites
  23. An enriched cohesive law using plane-part of interfacial strains to model intra/inter laminar coupling in laminated composites

Archives List