Congratulations on Liping's new paper accepted by IEEE SENSORS JOURNAL

02 February, 2021

Liping Yu, Nurlat Bekdullayev, and Gilles Lubineau
Smartphone-based single-camera stereo-DIC system: thermal error analysis and design recommendations

Accepted by IEEE SENSORS JOURNAL, 2021

Abstract:

Coupling a smartphone-based stereo-DIC system using a single smartphone and a 3D-printed four-mirror adapter has been recently proposed by the authors as a cost-effective and fieldportable 3D displacements measurement tools. However, this system is found to be very sensitive to temperature variation inside the smartphone and the ambient temperature variation around the system, which further can introduce displacement and strain errors into the measured results. Interestingly, the image coordinate drifts of image points that are directly associated with these thermal errors cannot be well explained by the existing temperature-induced camera deformation models. To eliminate the large thermal errors and realize high-accuracy 3D deformation measurement, a comprehensive thermal error analysis is performed for the smartphone-based single-camera stereo-DIC system. The theoretical estimations based on the existing temperature-induced camera deformation model are compared with the experimental observations. Then, all the potential error sources that can introduce thermal errors in the smartphone-based singlecamera stereo-DIC system are analyzed and discussed. Several comparison tests confirm that the thermal errors are caused by both the inner structural changes and the deformation from the adapter, and that the thermal errors from the adapter are much larger than those caused by the inner deformation inside the smartphone camera. Finally, a modified mirror adapter was fabricated and proven less sensitive to the temperature variation. This research is expected to explain all the potential thermal error sources in the smartphone-based single-camera stereo-DIC system and further contribute to the correction of the thermal errors and the optimal design of the adapter.

Keywords:

stereo-digital image correlation, smartphone, thermal error

The final version of record is available at

http://dx.doi.org/10.1109/JSEN.2021.3054805